The family wanted one thing more from the remodel, a room built for heat. A dedicated enclosure was framed inside the lower level, sealed and insulated behind the cladding, then lined floor to ceiling in clear cedar. Two bench tiers run in an L around two walls, with a slatted backrest above and a pebble mosaic floor carried in from the surrounding wet area.
Comfort at two temperatures drove the layout. The upper tier sits high enough to reach real heat while the lower stays usable for longer sessions, the L-plan lets several people sit without facing each other, and lighting was concealed behind the backrest so nothing glares when you lie back.
Within the same 10-month remodel, the lower level gained a finished sauna, fully built and fully backed by our team.
Services were resolved before the cedar closed the walls. A dedicated circuit was pulled for the heater, low-voltage strip lighting was routed behind the backrest rail, ventilation was set into the assembly, and the pebble mosaic was run up to the threshold so the floor reads continuous from the wet area into the room.
Sequencing mattered as much as the joinery. Building the sauna inside a live whole-house remodel meant its electrical and framing had to land with the rest of the lower level rather than after it, which is what kept the cedar work off the critical path and out of the way of four simultaneous bathrooms.
Handover covered a commissioned heater, tested controls and lighting, cleaned cedar, and a punch list documented with the rest of the property.
